Settings Login
Incorrect password
Alert Settings
Alert fires when flow drops below this value. ~2.1 GPH = 25% of normal flow.
Alert resets only when flow rises above this value. Must be higher than alert threshold to prevent repeated alerts near the boundary.
Used for % of normal calculation on dashboard. Update if your baseline flow changes.
Watchdog Settings
Alert fires if no reading is received within this many minutes. Default: 30 min (3 missed heartbeats).
Sensor Settings
Must match your iMonnit heartbeat setting. Used for flow rate calculation.
Calibration Table
From your Titan 815 calibration certificate (serial 357563, calibrated 26/02/2026). Flow is calculated by iterative interpolation between these points.
| Flow rate (L/min) | K factor (pulses/L) |
|---|
Change Settings Password
Inject Test Reading
Insert a synthetic reading to test the dashboard and alert logic without the pump running.